Valid priority values are: 0, 4096, 8192, 12288, 16384, 20480,
24576, 28672, 32768, 36864, 40960, 45056, 49152, 53248,
57344, and 61440. All other values are rejected.
Defaults
default bridge-priority is
32768
.
Command
Modes
INTERFACE
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
By default, all VLANs are mapped to MST instance zero (0) unless you use the
vlan
range
command to map it to a non-zero instance.
Although MSTP instance IDs range from 0 to 4094, only 64 active instances are
supported on the switch.
name
The name you assign to the multiple spanning tree region.
Syntax
name
region-name
To remove the region name, use the
no name
command.
Parameters
region-name
Enter the MST region name. The range is 32 character limit.
Defaults
no default name.
Command
Modes
MULTIPLE SPANNING TREE
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
For two MSTP switches to be within the same MSTP region, the switches must
share the same region name (including matching case).
Related
Commands
msti
— maps the VLAN(s) to an MST instance.
revision
— assigns the revision number to the MST configuration.
Multiple Spanning Tree Protocol (MSTP)
903
