• For a Fast Ethernet interface, enter the keyword
fastEthernet
then the slot/port information.
• For a Port Channel interface, enter the keywords
port-
channel
then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a VLAN, enter the keyword
vlan
then the VLAN ID.
The range is from 1 to 4094.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
ipv6 neighbor
Configure a static entry in the IPv6 neighbor discovery.
Syntax
ipv6 neighbor {
ipv6-address
} {interface
interface
}
{
hardware_address
}
To remove a static IPv6 entry from the IPv6 neighbor discovery, use the
no ipv6
neighbor {
ipv6-address
} {interface
interface
}
command.
Parameters
ipv6-address
Enter the IPv6 address of the neighbor in the x:x:x:x::x
format.
NOTE: The :: notation specifies successive hexadecimal
fields of zero.
interface
interface
Enter the keyword
interface
then the interface type and
slot/port or number information:
• For a Fast Ethernet interface, enter the keyword
fastEthernet
then the slot/port information.
• For a Port Channel interface, enter the keywords
port-
channel
then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
Neighbor Discovery Protocol (NDP)
921
