Command
History
Verison 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
line
Enable and configure console and virtual terminal lines to the system. This command accesses LINE
mode, where you can set the access conditions for the designated line.
Syntax
line {console 0 | vty
number
[
end-number
]}
Parameters
console 0
Enter the keyword
console 0
to configure the console
port. The console option is
<0-0>
.
vty
number
Enter the keyword
vty
then a number from 0 to 9 to
configure a virtual terminal line for Telnet sessions. The
system supports 10 Telnet sessions.
end-number
(OPTIONAL) Enter a number from 1 to 9 as the last virtual
terminal line to configure. You can configure multiple lines at
one time.
Defaults
Not configured
Command
Modes
CONFIGURATION
Command
History
Version 8.3.17.0
Supported on the M I/O Aggregator.
Usage
Information
You cannot delete a terminal connection.
Related
Commands
show memory
— view current memory usage on the M I/O Aggregator.
motd-banner
Enable a message of the day (MOTD) banner to appear when you log in to the system.
Syntax
motd-banner
Defaults
Enabled on all lines.
Command
Modes
LINE
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Control and Monitoring
95