Forward Address: 0.0.0.0
External Route Tag: 701
Dell#
Related
Commands
show ip ospf database
— displays OSPF database information.
show ip ospf database network
Display the network (type 2) LSA information.
Syntax
show ip ospf
process-id
database network [
link-state-id
] [adv-
router
ip-address
]
Parameters
process-id
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
link-state-id
(OPTIONAL) Specify LSA ID in dotted decimal format. The
LSA ID value depends on the LSA type, and it can be one of
the following:
• the network’s IP address for Type 3 LSAs or Type 5 LSAs
• the router’s OSPF router ID for Type 1 LSAs or Type 4
LSAs
• the default destination (0.0.0.0) for Type 5 LSAs
adv-router
ip-
address
(OPTIONAL) Enter the keywords
adv-router
and the ip-
address to display only the LSA information about that
router.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The following describes the
show ip ospf
process-id
database network
command shown in the following example.
Field
Description
LS Age
Displays the LSA’s age.
Options
Displays the optional capabilities available on router. The
following options can be found in this item:
• TOS-capability or No TOS-capability is displayed
depending on whether the router can support Type of
Service.
960
Open Shortest Path First (OSPFv2 and OSPFv3)