show ip ospf database nssa-external
Display NSSA-External (type 7) LSA information.
Syntax
show ip ospf database nssa-external [
link-state-id
] [adv-router
ip-address
]
Parameters
link-state-id
(OPTIONAL) Specify LSA ID in dotted decimal format. The
LSA ID value depends on the LSA type, and it can be one of
the following:
• the network’s IP address for Type 3 LSAs or Type 5 LSAs
• the router’s OSPF router ID for Type 1 LSAs or Type 4
LSAs
• the default destination (0.0.0.0) for Type 5 LSAs
adv-router
ip-
address
(OPTIONAL) Enter the keywords
adv-router
and the ip-
address to display only the LSA information about that
router.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
show ip ospf database
— displays OSPF database information.
show ip ospf database opaque-area
Display the opaque-area (type 10) LSA information.
Syntax
show ip ospf
process-id
database opaque-area [
link-state-id
]
[adv-router
ip-address
]
Parameters
process-id
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
link-state-id
(OPTIONAL) Specify LSA ID in dotted decimal format. The
LSA ID value depends on the LSA type, and it can be one of
the following:
• the network’s IP address for Type 3 LSAs or Type 5 LSAs
• the router’s OSPF router ID for Type 1 LSAs or Type 4
LSAs
• the default destination (0.0.0.0) for Type 5 LSAs
962
Open Shortest Path First (OSPFv2 and OSPFv3)