• the network’s IP address for Type 3 LSAs or Type 5 LSAs
• the router’s OSPF router ID for Type 1 LSAs or Type 4
LSAs
• the default destination (0.0.0.0) for Type 5 LSAs
adv-router
ip-
address
(OPTIONAL) Enter the keywords
adv-router
then the IP
address of an Advertising Router to display only the LSA
information about that router.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The following describes the
show ip ospf
process-id
database router
command shown in the following example.
Item
Description
LS Age
Displays the LSA age.
Options
Displays the optional capabilities available on router. The
following options can be found in this item:
• TOS-capability or No TOS-capability is displayed
depending on whether the router can support Type of
Service.
• DC or No DC is displayed depending on whether the
originating router can support OSPF over demand
circuits.
• E or No E is displayed on whether the originating router
can accept AS External LSAs.
LS Type
Displays the LSA type.
Link State ID
Displays the Link State ID.
Advertising Router Identifies the router ID of the LSA’s originating router.
LS Seq Number
Displays the link state sequence number. This number
detects duplicate or old LSAs.
Checksum
Displays the Fletcher checksum of an LSA’s complete
contents.
Length
Displays the length in bytes of the LSA.
Number of Links
Displays the number of active links to the type of router
(Area Border Router or AS Boundary Router) listed in the
previous line.
Link connected
to:
Identifies the type of network to which the router is
connected.
966
Open Shortest Path First (OSPFv2 and OSPFv3)