Figure 22. Removing and installing the expansion card from the expansion card riser
1.
touch point (2)
2. expansion card riser connector
3. expansion card riser
4. expansion card
Next steps
1.
Install the filler bracket or expansion card, if applicable.
2.
Install the expansion card riser
3.
Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
After working inside your system
Installing an expansion card
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1.
Follow the safety guidelines listed in Safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
3.
Remove the expansion card riser.
4.
If installed, remove the filler bracket.
Steps
1.
Locate the expansion card connector on the riser.
2.
Holding the expansion card by its edges, position the card so that the card connector aligns with the
connector on the expansion card riser.
87
