Dell OpenManage Network Manager Client Manual Download

Page: 158 / 388

158

Discovery Profiles | Resource Management

which credentials are tried (top first). Ordering only applies when two credentials are of the

same type.

Tip

If you have imported a discovery profile without importing or creating the authentications it uses, editing

authentications is an exercise in frustration. If you cannot import authentications, or have not created

them when you do attempt to edit them, the easiest solution is to delete the un-imported un-created

authentication the profile refers to and create a new one.

Actions

When you click

Next

, the

Actions

panel appears.

You can simply accept the default actions that appear here (like

Resync,

and

Learned MAC

discovery) by clicking

Next

to the Inspection portion of discovery, or you can do the following:

Add Action

—This opens a screen with a selection list of available actions. Click

Apply

select an action to add to the list for this profile.

Notice the default for this screen displays the

most common

actions, but you can also

click

keyword search

in the top right corner to display a search field instead of a pick list

with the most common actions. The search results appear in the pick list. When you

Summary of Contents for OpenManage Network Manager





































































































































































































































































































































































































Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands

Dell OpenManage Network Manager, Client Manual

Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands