Dell OpenManage Network Manager Client Manual Download

Page: 249 / 388

Resource Monitors | Monitoring

249

To reduce resource impacts, the

scope of retained data may

exclude some of the collected

data. A monitor may have no

retained data and only emit

events based on transient results

in the execution/calculation.
For example, the application

can derive a metric from several

collected values and you may

opt to retain only the derived result.
All monitors rely on a polling engine which provides runtime mediation activities for distributed

device interaction at regular intervals. Monitors may share a retention policy. Data is rolled up

hourly and daily into summary data. The retention policy controls how long data is held per roll-up

period.
When you manage these policies, you configure how monitored data is retained. When you select

Manage Retention Policies

in the Monitors portlet, first a list of available policies appears.

Clicking the

Add

button at the top of the screen lets you create a new policy, while clicking the

Edit

button to the right of selected, listed policies lets you modify existing policies. The

Delete

button

to the right of listed policies removes them from the list.

Summary of Contents for OpenManage Network Manager





































































































































































































































































































































































































Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands

Dell OpenManage Network Manager, Client Manual

Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands