Dell OpenManage Network Manager Client Manual Download

Page: 265 / 388

Resource Monitors | Monitoring

265

Test Key Metrics Monitor appears in the Resource Monitors portlet.

How To:

Create a Monitor Report

You can create reports based on your monitors. The following example creates a report based on

How to: Create an SNMP Interface Monitor above.

Create a new Report Template by right-clicking the Report Templates portlet, selecting

New

> Table Template.

Name the report (here: Test SNMP Interface Report).

Select a source in the

Source

tab. Here:

Active Monitoring > SNMP Interfaces.

Notice that the

Select your inventory columns

panel displays the attributes available based on

your monitor selection.

Select

Available

columns and click the right arrow to move them to

Selected.

In this case we

select SNMP Interfaces: Monitor Target, Polled Date / Time, ifInErrors.

Arrange the columns and fonts as you like in the

Layout

tab.

Save

the template.

Right-click, and select

New

in the Reports portlet.

Enter a

Name

and

Title

for the report.

Notice that since this is the first report created since you made the Test SNMP Interface

Report template, that it is the

Report Template

already selected.

Since the monitor already filters devices, we add no filter in the Report, although you could

add one to further filter the monitored devices.

Test SNMP Interface Report should appear in the Reports portlet.

Right-click and select

Execute

(noticing that you can also schedule such reports, even

repeatedly).

Summary of Contents for OpenManage Network Manager





































































































































































































































































































































































































Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands

Dell OpenManage Network Manager, Client Manual

Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands