Steps
1. Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme:
Table 2. Antenna-cable color scheme
Connectors on the wireless card
Antenna-cable color
Main (white triangle)
White
Auxiliary (black triangle)
Black
2. Place the wireless-card bracket on the wireless card.
3. Align the notch on the wireless card with the tab on the wireless-card slot.
4. Slide the wireless card at an angle into the wireless-card slot.
5. Replace the screw (M2x4) to secure the wireless-card bracket to the wireless card.
6. Align and place the wireless-card shield on the system board and wireless card.
7. Route the antenna cables through the routing guides on the display-assembly base.
8. Replace the two screws (M2x4) to secure the wireless-card shield to the system board.
Next steps
1. Install the
2. Install the
3. Install the
4. Install the
.
After working inside your computer
.
40
Removing and installing components