5. Align the screw holes on the camera door with the screw holes on the display-assembly base.
6. Replace the two screws (M3x5) to secure the camera assembly door to the display-assembly base.
Next steps
1. Install the
2. Install the
3. Install the
4. Install the
.
After working inside your computer
.
Bottom cover
Removing the bottom cover
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
(optional).
4. Remove the
.
5. Remove the
About this task
The following image indicates the location of the bottom cover and provides a visual representation of the removal procedure.
Removing and installing components
43