CAUTION:
Ensure that the processor-cover notch is positioned underneath the alignment post.
3. When the processor is fully seated in the socket, pivot the release-lever down and place it under the tab on the processor
cover.
Next steps
1. Install the
.
2. Install the
.
3. Install the
4. Install the
5. Install the
6. Install the
.
After working inside your computer
.
Rear-I/O bracket
Removing the rear-I/O bracket
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
4. Remove the
.
5. Remove the
.
6. Remove the
About this task
The following image indicates the location of the rear-I/O bracket and provides a visual representation of the removal
procedure.
Removing and installing components
49