About this task
The following image indicates the location of the hard-drive bracket and provides a visual representation of the installation procedure.
Steps
1. Place the hard-drive into the bracket.
2. Align and insert the pins on the drive bracket with the slots on the drive.
NOTE:
Note the orientation of the hard-drive so that you can replace it correctly.
Next steps
1. Install the
2. Install the
3. Install the
.
4. Follow the procedure in
after working inside your computer
.
Installing the 2.5 in. hard-drive assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the hard-drive assembly and provides a visual representation of the installation procedure.
24
Disassembly and reassembly
Summary of Contents for OptiPlex 7080 Micro
