Steps
1. Connect the display cable to the connector on the back of the display panel and lock the display cable connector.
2. Adhere the adhesive rubber strip to cover the display cable connector.
3. Adhere the transparent tape and conductive tape above the rubber strip to cover the display cable connector.
4. Align the display panel with the tabs on the display assembly.
5. Replace the two (M2.5X2.5) and two (M2x2.5) screws to secure the display panel to the display assembly.
Next steps
1. Install the
2. Install the
.
3. Install the
4. Install the
.
5. Install the
.
6. Install the
.
7. Install the
.
8. Install the
9. Install the
10. Install the
.
11. Install the
.
Removing and installing components
101
Summary of Contents for OptiPlex 7760
