Steps
1. Place the camera module in its slot on the display back cover.
2. Place the camera shutter cap on the top edge of the camera shutter.
3. Connect the display cable to the camera module.
4. Adhere the adhesive tape to cover the camera module.
Next steps
1. Install the
.
2. Install the
3. Install the
4. Install the
.
5. Install the
.
6. Install the
.
7. Install the
.
8. Install the
.
9. Install the
10. Install the
11. Install the
.
12. Install the
.
13. Install the
14. Install the
.
15. Install the
16. Install the
17. Install the
.
18. Install the
.
19. Install the
.
20. Install the
.
21. Install the
.
22. Install the
.
23. Install the
.
after working inside your computer
.
108
Removing and installing components
Summary of Contents for OptiPlex 7760
