Steps
1. Route the keyboard FPC and the keyboard backlight FPC through the opening on the palmrest.
2. Align the tabs on the keyboard with the tabs on the computer chassis at an angle.
3. Place the keyboard on the palmrest.
4. Replace the six (M2x2) screws to secure the keyboard to the palmrest.
5. Turn-over the system at 90° angle to access the keyboard FPC and the keyboard backlight FPC.
6. Connect the keyboard backlight FPC and the keyboard FPC to the connectors on the system board.
NOTE:
Ensure that you fold the keyboard data cable in perfect alignment.
Next steps
1. Install the
2. Install the
.
3. Install the
.
4. Install the
.
after working inside your computer
.
44
Removing and installing components
Summary of Contents for OptiPlex 7760
