3. Carefully align the two clips on the memory shield with the slots on the computer chassis and insert the clips under the
chassis.
4. Place the memory shield and slide it towards the left side of the computer to cover the memory module.
5. Replace the (M2x3) screw to secure the memory shield to the memory module.
Next steps
1. Install the
.
2. Install the
3. Install the
.
4. Install the
.
5. Install the
.
after working inside your computer
.
Inner frame
Removing the inner frame
Prerequisites
before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
.
6. Remove the
7. Remove the
About this task
The figure indicates the location of the inner frame and provides a visual representation of the removal procedure.
Removing and installing components
47
Summary of Contents for OptiPlex 7760
