Replacing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
.
Procedure
1
Using the alignment posts on the palm-rest assembly, place the speakers on the
palm-rest assembly.
2
Replace the four screws (M2x2) that secure the speakers to the palm-rest
assembly.
3
Route the speaker cable on the system board and adhere the tape to the system
board.
4
Connect the speaker cable to the system board.
5
Adhere the tape securing the speaker cable to the system board.
Post-requisites
1
Replace the
.
2
Replace the
.
33
