Replacing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
.
Procedure
1
Align the screw hole on the power-adapter port with the screw hole on the
palm-rest assembly.
2
Replace the screw (M2x3) that secures the power-adapter port to the palm-rest
assembly.
3
Route the power-adapter port cable through the routing guide on the palm-rest
assembly.
Post-requisites
1
Replace the
.
2
Replace the
.
3
Replace the
.
4
Replace the
.
77
