Replacing the keyboard
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
.
Procedure
1
Align the screw holes on the keyboard with the screw holes on the palm-rest
assembly.
2
Replace the 30 screws (M1.6x1.5) that secure the keyboard to the palm-rest
assembly.
3
Adhere the touchpad cable, the I/O-board cable, and the keyboard-controls
board cable to the keyboard.
4
Slide the keyboard cable and the keyboard-backlight cable into the keyboard-
controls board and close the latches to secure the cables.
Post-requisites
1
Replace the
.
2
Replace the
3
Follow the procedure from step 1 to step 8 in "
".
4
Replace the
.
5
Replace the
6
Replace the
.
7
Replace the
.
8
Replace the
.
9
Replace the
.
10
Replace the
.
86
