Replacing the battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
.
Procedure
1
Align the screw holes on the battery with the screw holes on the palm-rest
assembly.
2
Replace the three screws (M2x3) that secure the battery to the palm-rest
assembly.
3
Replace the screw (M1.6x4) that secures the battery to the palm-rest assembly.
4
Connect the battery cable to the system board.
Post-requisites
Replace the
.
22
