Installation
5
1
Installation
Overview
This document provides basic information to install and start running the following
PowerConnect 2800 series of Web-managed Gigabit Ethernet switches:
• PowerConnect 2808
• PowerConnect 2816
• PowerConnect 2824
• PowerConnect 2848
The PowerConnect 2800 series can be used to connect workstations and other network devices,
such as:
• Servers
• Hubs
• Routers
The PowerConnect devices are primarily intended for the Small Office/Home Office (SOHO)
that require high performance edge connectivity. These PowerConnect devices are ideal for the
small to medium business that requires high performance network connectivity along with
advanced web management features. The PowerConnect management features are designed to
minimize administrative management effort, while enhancing and improving network traffic
control.
The switch is delivered from the factory in Unmanaged Mode. If users wish to use the switch as an
unmanaged switch, they can simply plug the switch in and start using it. No configuration is
necessary. If the same user wishes to use the switch as a managed switch, they need to change the
mode from Unmanaged to Managed, as described in the Dell™ PowerConnect™ 2800 Series
User’s Guide, available on the Documentation CD. Alternatively, you may check the Dell support
website at www.support.dell.com for the latest documentations and software updates.
Site Preparation
Site Requirements
The PowerConnect 2808/16/24/48 devices can be mounted in a standard equipment rack, placed
on a tabletop, or mounted on the wall.
