xiv
PowerConnect B-DCX-4S Backbone Hardware Reference Manual
53-1001808-01
ESD precautions
The PowerConnect B-DCX-4S contains electrostatic discharge (ESD) sensitive FRUs. When
working with any PowerConnect B-DCX-4S FRU, use correct ESD procedures.
•
Wear a wrist grounding strap connected to chassis ground (if the PowerConnect B-DCX-4S
is plugged in) or a bench ground.
•
Store ESD-sensitive components in antistatic packaging.
Safety notices
NOTE
Translated safety notices are in the
Brocade Product Safety Notices
publication, which is on the
CD-ROM that accompanies this product.
When using this product, observe the danger, caution, and attention notices in this manual. The
notices are accompanied by symbols that represent the severity of the safety condition.
The danger and caution notices are listed in numerical order based on their IDs, which are
displayed in parentheses, for example (D004), at the end of each notice. Use this ID to locate the
translations of these danger and caution notices in the
Brocade Product Safety Notices
.
Document feedback
Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and
completeness of this document. However, if you find an error or an omission, or you think that a
topic needs further development, we want to hear from you. Forward your feedback to:
documentation@brocade.com
Provide the title and version number of the document and as much detail as possible about your
comment, including the topic heading and page number and your suggestions for improvement.
