Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide
15
2.7.4 Assigning a Static IP Address to the WAN-Facing
Interface
To assign a static IP address to the WAN-facing (internet)
interface:
1 .
Click the
Configure
tab at the top of the page and navigate
to
Interfaces
.
2 .
Expand
fe-0/0/0
and select the logical interface.
3 .
Click
Edit
and select the zone as
untrust
from the list.
4 .
Click the
IPv4 Address
tab.
5 .
Select
Enable address configuration
and then select the
IPv4 Address
check box
.
NOTE:
The
IPv4 Address
check box must be selected
before the
Add
button is automatically enabled.
2.7.3 Creating a User Account
To configure a user (other than an administrative account) and to
set different permissions while accessing the Dell PowerConnect
J-Series J-SRX100S/SU Services Gateway:
1 .
Click the
Configure
tab at the top of the page and choose
System Properties
>
User Management
.
2 .
Click
Edit
at the top right corner of the page, and then click
Add
.
3 .
Enter the username and password.
4 .
Select the required permission from the list in Login class.
5 .
Click
OK
.