24
Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide
5 .
In Enable HTTP/HTTPS, to enable HTTP/HTTPs on all
available interfaces:
a. Click the
Enable on all interfaces
check box or
b. To add HTTP/HTTPS only to certain interfaces move the
required interfaces to
selected interfaces .
NOTE:
Before enabling HTTPS access, ensure that the
system date and time is set accurate.
6
.
C
lick
OK
.
3 .6 Allowing Host Inbound Traffic
To allow host-inbound service for a zone/interface:
1 .
Click the
Configure
tab at the top of the page, navigate to
Security
>
Zones/Screens
.
2 .
Click the security zone that you want to modify (for example,
untrust).
3 .
In the Main tab, ensure
fe-0/0/0
interface is in the
Selected
column.
4 .
Click the
Host inbound traffic – Zone
tab.
5 .
Select the required services and protocols and move them to
Selected
.
6 .
Optionally, to allow host inbound traffic at interface level
(instead of allowing to the entire zone):
a. Click the
Host inbound traffic – Interface
tab.
b. Click on the
fe-0/0/0
interface (for this example).
c. Follow step 4 and step 5.
7
.
C
lick
OK
.
3 .7 Applying the Security Policy Configuration
Once the configuration is complete, you can save the changes.
To save the configuration, select
Commit Options
on the top
right corner of the page and click
Commit
.