manualshive.com logo in svg

Dell PowerConnect J-SRX210, Hardware Manual

The Dell PowerConnect J-SRX210 Hardware Manual is available for free download at 88.208.23.73:8080. This comprehensive manual provides detailed instructions and troubleshooting tips for optimizing the performance of your PowerConnect J-SRX210 device. Take advantage of this valuable resource to harness the full potential of your networking solution.

Share
Download
background image

Chapter 3

J-SRX210 Services Gateway 3G ExpressCard . . . . . . . . . . . . . . . . . . . . . . . . . 25

J-SRX210 Services Gateway 3G ExpressCard Overview . . . . . . . . . . . . . . . . . . . . . 25

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Using the 3G ExpressCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Installing the 3G ExpressCard in the J-SRX210 Services Gateway ExpressCard

Slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

J-SRX210 Services Gateway 3G ExpressCard Basic CLI Commands . . . . . . . . . . . 28

Chapter 4

J-SRX210 Services Gateway Power over Ethernet Support . . . . . . . . . . . . . . 31

J-SRX210 Services Gateway PoE Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
PoE Classes and Power Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Configuring PoE Functionality on the J-SRX210 Services Gateway . . . . . . . . . . . . 33

Chapter 5

J-SRX210 Services Gateway with Integrated Convergence Services . . . . . . 35

About the J-SRX210 Services Gateway with Integrated Convergence

Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Basic Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Supported Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Common Deployment Scenarios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Understanding the Functions of the J-SRX210 Services Gateway with Integrated

Convergence Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

J-SRX210 Services Gateway with Integrated Convergence Services

Interoperability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Configuring the J-SRX210 Services Gateway with Integrated Convergence

Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Chapter 6

J-SRX210 Services Gateway Mini-Physical Interface Modules . . . . . . . . . . . 41

J-SRX210 Services Gateway Mini-Physical Interface Modules . . . . . . . . . . . . . . . . 41

Part 2

Setting Up the J-SRX210 Services Gateway

Chapter 7

Preparing the Site for the J-SRX210 Services Gateway Installation . . . . . . 45

Site Preparation Checklist for the J-SRX210 Services Gateway . . . . . . . . . . . . . . . 45
General Site Guidelines for Installing the J-SRX210 Services Gateway . . . . . . . . . 47
J-SRX210 Services Gateway Cabinet Requirements . . . . . . . . . . . . . . . . . . . . . . . 48
J-SRX210 Services Gateway Rack Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Clearance Requirements for Airflow and Hardware Maintenance of the J-SRX210

Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

J-SRX210 Services Gateway Electrical and Power Requirements . . . . . . . . . . . . . 51

Chapter 8

Installation Overview for the J-SRX210 Services Gateway . . . . . . . . . . . . . . 53

Installation Overview for the J-SRX210 Services Gateway . . . . . . . . . . . . . . . . . . . 53

Chapter 9

Required Tools and Parts for Installing and Maintaining the J-SRX210
Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Required Tools and Parts for Installing and Maintaining the J-SRX210 Services

Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

viii

PowerConnect J-SRX210 Services Gateway Hardware Guide

Summary of Contents for PowerConnect J-SRX210























































































































































































Reviews:

No comments

Related manuals for PowerConnect J-SRX210

Yeastar Technology TA Series How To Connect preview
TA Series
Brand: Yeastar Technology Pages: 14
Kärcher SRD Manual preview
SRD
Brand: Kärcher Pages: 7
THOMSON TG782 Setup And User Manual preview
TG782
Brand: THOMSON Pages: 90
netvox ZigBee ZL01A User Manual preview
ZigBee ZL01A
Brand: netvox Pages: 13
RTA 490NBX-NNA1 Product User Manual preview
490NBX-NNA1
Brand: RTA Pages: 43
TP-Link Deco X50-4G User Manual preview
Deco X50-4G
Brand: TP-Link Pages: 63
Pepperl+Fuchs PROFINET K20 Brief Instructions preview
PROFINET K20
Brand: Pepperl+Fuchs Pages: 14
NETGEAR DEVG2020 DOT User Manual preview
DEVG2020 DOT
Brand: NETGEAR Pages: 25
NETGEAR CG814WG Installation Manual preview
CG814WG
Brand: NETGEAR Pages: 2
Hybertone HT-322 User Manual preview
HT-322
Brand: Hybertone Pages: 33
TRI02SYS EnOcean 02LINE Installation And Operating Manual preview
EnOcean 02LINE
Brand: TRI02SYS Pages: 4
Endress+Hauser Fieldgate FXA720 Operating Instructions Manual preview
Fieldgate FXA720
Brand: Endress+Hauser Pages: 66
OWL INTUITION Getting Started preview
INTUITION
Brand: OWL Pages: 16
ActionTec VOSKY UP101 User Manual preview
VOSKY UP101
Brand: ActionTec Pages: 41
Lantronix EDS-MD 16 Command Reference Manual preview
EDS-MD 16
Brand: Lantronix Pages: 738
Avaya G450 Manager Cli Reference Manual preview
G450 Manager
Brand: Avaya Pages: 1334
Samsara AG26 Install Manual preview
AG26
Brand: Samsara Pages: 11
D-Link DFL-M510 Quick Manual preview
DFL-M510
Brand: D-Link Pages: 19

Brands by name

Popular brands

Load more brands