128
Configuration/Image File Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Configuration_Image.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 5 / 1 5 /1 2 - F O R P R O O F O N LY
Command Mode
Privileged EXEC mode
User Guidelines
The location of a file system dictates the format of the source or destination
URL.
The entire copying process may take several minutes and differs from
protocol to protocol and from network to network.
If the IPv6 address is a Link Local address (IPv6Z address), the outgoing
interface name must be specified. The format of an IPv6Z address is: {
ipv6-
link-local-address
}
%
{
interface-name
}. The subparameters are:
•
ipv6-link-local-address
—Specifies the IPv6 Link Local address.
boot
Boot file.
tftp://
Source or destination URL for a TFTP network server. The syntax for
this alias is
tftp://host/[directory]/filename
. The host can be either an IP
address or a host name.
usb://
Copy to a file on the USB device. The syntax is:
usb://
directory
/
filename
xmodem:
Source for the file from a serial connection that uses the Xmodem
protocol.
unit://member/i
mage
Image file on one of the units. To copy from the master to all units,
specify * in the member field.
unit://member/
boot
Boot file on one of the units. To copy from the master to all units,
specify * in the member field
unit://member/
startup-config
Configuration file used during initialization (startup) on one of the units.
null:
Null destination for copies or files. A remote file can be copied to null to
determine its size.
mirror-config
Mirrored configuration file
WORD<1-128>
Specify URL prefixes.
K e y w o r d
S o u r c e o r D e s t i n a t i o n
