SNMP Commands
163
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\SNMP.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 5/ 1 5 /1 2 - F O R PR O O F O N LY
•
excluded
—Specifies that the view type is excluded.
Default Configuration
Default and DefaultSuper are the default view names.
Command Mode
Global Configuration mode
User Guidelines
This command can be entered multiple times for the same view record.
The command logical key is the pair (view-name, oid-tree).
The number of views is limited to 64.
Default and DefaultSuper views are reserved for internal software use and
cannot be deleted or modified.
Example
The following example creates a view that includes all objects in the MIB-II
system group except for sysServices (System 7) and all objects for interface 1
in the MIB-II interface group.
Console(config)#
snmp-server view
user-view system
included
Console(config)#
snmp-server view
user-view system.7
excluded
Console(config)#
snmp-server view
user-view ifEntry.*.1
included
snmp-server group
The
snmp-server group
Global Configuration mode command configures a
new Simple Network Management Protocol (SNMP) group or a table that
maps SNMP users to SNMP views. Use the
no
form of this command, remove
a specified SNMP group.
Syntax
snmp-server group
groupname
{
v1 | v2 | v3 {noauth | auth | priv} [notify
notifyview]} [read readview] [write writeview]
