AAA Commands
233
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\AAA.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 5/ 1 5 /1 2 - F O R PR O O F O N LY
aaa accounting dot1x
To enable accounting of 802.1x sessions, use the
aaa accounting dot1x
Global
Configuration mode command. Use the
no
form of this command to disable
accounting.
Syntax
aaa accounting dot1x
start-stop group radius
no aaa accounting dot1x
start-stop group radius
Parameters
This command has no arguments or keywords.
Default
Disabled
Command Mode
Global Configuration mode
User Guidelines
This command enables the recording of 802.1x sessions.
If accounting is activated, the device sends a “start”/“stop” messages to a
Radius server when a user logs in / logs out to the network, respectively.
The device uses the configured priorities of the available Radius servers in
order to select the Radius server.
If a new replaces an old supplicant (even if the port state remains authorized),
the software sends a “stop” message for the old supplicant and a “start”
message for the new supplicant.
In multiple sessions mode (dot1x multiple-hosts authentication), the
software sends “start”/“stop” messages for each authenticated supplicant.
In multiple hosts mode (dot1x multiple-hosts), the software sends
“start”/“stop” messages only for the supplicant that has been authenticated.
