234
AAA Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\AAA.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 5 / 1 5 /1 2 - F O R P R O O F O N LY
The software does not send “start”/“stop” messages if the port is force-
authorized.
The software does not send “start”/“stop” messages for hosts that are sending
traffic on the guest VLAN or on the unauthenticated VLANs.
The following table describes the supported Radius accounting Attributes
Values and when they are sent by the switch.
Example
console(config)#
aaa accounting dot1x
start-stop group radius
N a m e
Sta r t
St o p
D e s c r i p t i o n
User-Name (1)
Yes
Yes
Supplicant’s identity.
NAS-IP-Address (4)
Yes
Yes
The switch IP address that is used
for the session with the Radius
server.
NAS-Port (5)
Yes
Yes
The switch port from where the
supplicant has logged in.
Class (25)
Yes
Yes
Arbitrary value is included in all
accounting packets for a specific
session.
Called-Station-ID (30)
Yes
Yes
The switch MAC address.
Calling-Station-ID (31)
Yes
Yes
The supplicant MAC address.
Acct-Session-ID (44)
Yes
Yes
A unique accounting identifier.
Acct-Authentic (45)
Yes
Yes
Indicates how the supplicant was
authenticated.
Acct-Session-Time (46)
No
Yes
Indicated how long the supplicant
was logged in.
Acct-Terminate-Cause (49)
No
Yes
Reports why the session was
terminated.
Nas-Port-Type (61)
Yes
Yes
Indicates the supplicant physical port
type.
