322
802.1x Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\802.1X.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 5 / 1 5 /1 2 - F O R P R O O F O N LY
User Guidelines
User based ACL/Qos-Policy assignment is supported only in 802.1x multiple
sessions.
The configuration of the parameter is allowed only when the port is Forced
Authorized or Forced Unauthorized.
dot1x radius-attributes errors
Use the
dot1x radius-attributes errors
Global Configuration mode command
to specify error handling for the Radius attributes feature. Use the
no
form of
this command to return to default.
Syntax
dot1x radius-attributes errors
filter-id resources {accept | reject}
no dot1x radius-attributes errors
filter-id resources
Parameters
accept
—If the Filter-ID cannot be allocated for resource allocation reasons,
the user is accepted. If the Filter-ID canot be allocated for other reasons, the
user is rejected.
reject
—If the Filter-ID cannot be assigned, the user is rejected.
Default
Reject
Command Mode
Global Configuration mode
dot1x legacy-supp-mode
Use the
dot1x legacy-supp-mode
Interface Configuration mode command in
multiple session mode to enable 802.1x switch to send a periodic EAPOL
request identity frame according to tx timeout period in order to verify
authentication in multiple session mode of clients that do not follow 802.1x
standard behavior. Use the
no
form of this command to return to the default
setting.
