658
DHCP Server Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\DCHP_Server.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 5 / 1 5 /1 2 - F O R P R O O F O N LY
Syntax
ip dhcp pool host
name
no ip dhcp pool host
name
Parameters
name
—Specifies the DHCP address pool name. It can be either a symbolic
string (such as Engineering) or an integer (such as 8). (Length: 1–32
characters)
Default Configuration
DHCP hosts are not configured.
Command Mode
Global Configuration mode
User Guidelines
During execution of this command, the configuration mode changes to the
DHCP Pool Configuration mode, which is identified by the (config-dhcp)#
prompt. In this mode, the administrator can configure host parameters, such
as the IP subnet number and default router list.
Example
The following example configures Station as the DHCP address pool:
Console(config)#
ip dhcp pool host
station
Console(config-dhcp)#
ip dhcp pool network
Use the
ip dhcp pool network
Global Configuration mode command to
configure a Dynamic Host Configuration Protocol (DHCP) address pool on a
DHCP Server and enter DHCP Pool Configuration mode. Use the
no
form of
this command to remove the address pool.
Syntax
ip dhcp pool network
name
