686
DHCP Server Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\DCHP_Server.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 5 / 1 5 /1 2 - F O R P R O O F O N LY
The following table describes the significant fields shown in the display.
show ip dhcp declined
Use the
show ip dhcp declined
EXEC command to display the specific one or
all the declined addresses on the Dynamic Host Configuration Protocol
(DHCP) server.
Syntax
show ip dhcp declined
[ip-address]
Parameters
ip-address
—Specifies the IP address.
Command Mode
EXEC mode
Example
Router> show ip dhcp declined
DHCP server enabled
IP address Hardware address
172.16.1.11 00a0.9802.32de
172.16.3.254 02c7.f800.0422
Router> show ip dhcp declined 172.16.1.11
DHCP server enabled
F i e l d D e s c r i p t i o n
IP address
The host IP address as recorded on the DHCP Server.
Hardware
address
The MAC address or client identifier of the host as recorded
on the DHCP Server.
Lease expiration
The lease expiration date of the host IP address.
Type
The manner in which the IP address was assigned to the
host.
