72
System Management Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\System_Management.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 5 / 1 5 /1 2 - F O R P R O O F O N LY
Command Mode
EXEC mode
User Guidelines
Press
Esc
to stop pinging. Following are sample results of the ping command:
•
Destination does not respond
—If the host does not respond, a “no answer
from host” appears within 10 seconds.
•
Destination unreachable
—The gateway for this destination indicates that
the destination is unreachable.
•
Network or host unreachable
—The switch found no corresponding entry
in the route table.
The format of an
IPv6Z
address is: <
ipv6-link-local-address>%<interface-
name
>
•
interface-name
=
vlan<integer> | ch<integer> | isatap<integer> |
<physical-port-name> | 0
•
integer
= <
decimal-number> | <integer><decimal-number
>
•
decimal-number
=
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9
•
physical-port-name
= Designated port number, for example
gi1/0/1
When using the ping
ipv6
command to check network connectivity of a
directly attached host using its link local address, the egress interface may be
specified in the
IPv6Z
format. If the egress interface is not specified, the
default interface is selected. Specifying interface zone=0 is equivalent to not
defining an egress interface.
When using the ping
ipv6
command with MC address, the information
displayed is taken from all received echo responses.
Examples
Console> ping ip 10.1.1.1
Pinging 10.1.1.1 with 64 bytes of data:
64 bytes from 10.1.1.1: icmp_seq=0. time=11 ms
64 bytes from 10.1.1.1: icmp_seq=1. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=2. time=8 ms
