Dell PowerConnect W Airwave 7.1 User Manual Download

Page: 207 / 334

Dell PowerConnect W AirWave 7.1

| User Guide

Using RAPIDS and Rogue Classification |

207

To create a new rule, select the

Add

button

next to

New RAPIDS Classification Rule

to launch the

RAPIDS

Classification Rule

page (see

Figure 136

Figure 136

Classification Rule

Page

Fill in the settings described in

Table 105

then select an option from the drop down menu.

Table 106

Table 107

, and

Table 108

define the drop down menu options that are at the bottom left of the

RAPIDS Classification Rule dialog box (see

Figure 136

). Once all rule settings are defined, click the

Add

button.

The new rule automatically appears in the

RAPIDS > Rules

page.

Reorder Drag and Drop Icon

Changes the sequence of rules in relation to each other. Click, then drag and drop, the icon for

any rule to move it up or down in relation to other rules. A revised sequence of rules must be

saved before rogues are classified in the revised sequence.
NOTE: The sequence of rules is very important to proper rogue classification. A device gets

classified by the first rule to which it complies, even if it conforms to additional rules later in the

sequence.

Table 106

Wireless Properties

Drop Down Menu

Option

Description

Detected on WLAN

Classifies based on how the rogue is detected on the wireless LAN.

Discovering AP Count

Classifies based on the number of managed devices that can hear the rogue. Enter a numeric

value and select At Least or At Most.

Encryption

Classifies based on the rogue matching a specified encryption method.

Table 105

RAPIDS > Rules

Page

Field

Description

Summary of Contents for PowerConnect W Airwave 7.1















































































































































































































































































































































Search results

Summary of Contents for PowerConnect W Airwave 7.1

Reviews:

Related manuals for PowerConnect W Airwave 7.1

Brands by name

Popular brands

Dell PowerConnect W Airwave 7.1, User Manual

Search results

Summary of Contents for PowerConnect W Airwave 7.1

Reviews:

Related manuals for PowerConnect W Airwave 7.1

Brands by name

Popular brands