l
On the left side of the screen,
Device Groups
lists the diagnostic device groups in the order they will run if you select
All
under the
Run Tests
submenu. Press the up- or down-arrow key to highlight a device group.
l
On the right side of the screen,
Devices for Highlighted Group
lists the specific devices within a particular test group.
l
Two lines at the bottom of the screen make up the menu area. The first line lists the menu options you can select; press the left- or right-arrow key to
highlight an option. The second line gives information about the highlighted option.
Using the Device Groups Menu
The
Device Groups
menu at the bottom of the screen provides options that enable you to select and run specific diagnostic tests from the diagnostics main
screen. Press the left- and right-arrow keys to select the options on the menu. As you move from one menu option to another, a brief explanation of the
highlighted option appears on the bottom line of the screen.
If you want more information about a device group or device, highlight the
Help
option and press <Enter>. After you read the information, press <Esc> to
return to the previous screen.
Error Messages
When you run a test in the system diagnostics, you may receive an error message. Record the message on a copy of the Diagnostics Checklist. For a copy of
the Diagnostics Checklist and instructions on obtaining technical assistance, see "
Getting Help
."
Back to Contents Page
