49
Controlling Your System at the Analog Ports
the cascaded switch is visible on screen. When you select from the list, the
Modify
button is enabled, allowing you to assign it the appropriate number of
ports.
NOTE:
The Modify button is available only if a configurable switch is selected.
To access the Server dialog box:
1
Press <Print Screen>
to launch the OSCAR interface. The
Main
dialog
box appears.
2
Click
Setup - Devices
.
The
Devices
dialog box displays.
Figure 3-7. Devices Dialog Box
When the Remote Console Switch discovers a cascaded switch, the port
numbering changes to accommodate each device under that switch. For
example, if the switch is connected to ARI port 6, the switch port is listed as
06 and each device under it is numbered sequentially 06-01, 06-02 and so on.
NOTE:
Changes made in the Device Modify dialog box are not saved until you click
OK in the Devices dialog box.
To assign a device type:
1
In the
Devices
dialog box, select the desired port number.
2
Click
Modify
. The
Device Modify
dialog box displays.
