Table 6. Dimensions of the PowerEdge C6400 enclosure
Xa
Xb
Y
Za
Zb
Zc
482.6 mm (19 inches) 448 mm (17.63
inches)
86.8 mm (3.41
inches)
26.8 mm (1.05
inches)
763.2 mm (30.28
inches)
797.3 mm (31.38
inches)
Chassis weight
Table 7. Chassis weight of the PowerEdge C6400 enclosure with PowerEdge C6420 sleds
System
Maximum weight (with all sleds and drives)
12 x 3.5-inch hard drive systems
43.62 Kg (96.16 lb)
24 x 2.5-inch hard drive systems
41.46 Kg (91.40 lb)
No backplane systems
34.56 Kg (76.19 lb)
PSU specifications
The PowerEdge C6400 enclosure supports two AC power supply units (PSUs).
Table 8. PSU specifications
PSU wattage
Class
Heat dissipation
(maximum)
Frequency
Voltage
Maximum input current
2400 W AC
Platinum
715 BTU/hr
50/60 Hz
100–240 V AC,
autoranging
14 A–16 A
2000 W AC
Platinum
635 BTU/hr
50/60 Hz
100–240 V AC,
autoranging
11.5 A
1600 W AC
Platinum
475 BTU/hr
50/60 Hz
100–240 V AC,
autoranging
10 A
NOTE:
Heat dissipation is calculated using the PSU wattage rating.
NOTE:
This system is also designed to connect to the IT power systems with a phase to phase voltage not exceeding 240 V.
NOTE:
If a system with 2400 W AC PSU operates at low line 100–120 V AC, then the power rating per PSU is derated to 1400 W.
NOTE:
If a system with 2000 W AC PSU operates at low line 100–120 V AC, then the power rating per PSU is derated to 1000 W.
NOTE:
If system with 1600 W AC PSU operates at low line 100–120 V AC, then the power rating per PSU is derated to 800 W.
Hard drives and storage specifications
The PowerEdge C6420 sled supports SAS and SATA hard drives and Solid State Drives (SSDs).
Dell PowerEdge C6400 Installation and Service Manual
Technical specifications
19
