Related Links
Safety instructions
Before working inside your system
Installing the cooling shroud
After working inside your system
Installing the cooling shroud
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
3.
Remove the cooling shroud.
NOTE: You must remove the cooling shroud to service other components inside the system.
Steps
1.
Align the guide pins on the cooling shroud with the guide slots on the system board.
2.
Lower the cooling shroud into the chassis until the tabs on the sides of cooling shroud engage with
the slots on the chassis.
Figure 12. Installing the cooling shroud
1.
cooling shroud
2. tab (4)
3. guide pin (2)
Next steps
Follow the procedure listed in the After working inside your system section.
64
