52
Using the System Setup Program
Exit Screen
After you press <Esc> to exit the System Setup program, the
Exit
screen
displays the following options:
•
Save Changes and Exit
•
Discard Changes and Exit
•
Return to Setup
TPM Clear
(
No
default)
NOTICE:
Clearing the TPM will cause loss of all
encryption keys in the TPM. This option will prevent
booting to the operating system and will result in loss
of data if the encryption keys cannot be restored. Be
sure to back up the TPM keys prior to enabling this
option.
When set to
Yes
, all the contents of the TPM are cleared.
NOTE:
This field is read-only when
TPM Security
is set to
Off
.
Power Button
(
Enabled
default)
Turns system's power off and on. On an
ACPI-compliant
operating system, the system performs an orderly shutdown
before power is turned off.
The button is enabled in the System Setup program.
When disabled, the button can only turn on system power.
NOTE:
You can still turn on the system by using the power
button, even if the
Power Button
option is set to
Disabled
.
NMI Button
(
Disabled
default)
NOTICE:
Use the NMI button only if directed to do so
by qualified support personnel or by the operating
system's documentation. Pressing this button halts
the operating system and displays a diagnostic
screen.
Sets the NMI feature
On
or
Off
.
AC Power Recovery
(
Last
default)
Determines how the system reacts when power is restored
to the system. If system is set to
Last
, the system returns
to the last power state.
On
turns on the system after
power is restored. When set to
Off
, the system remains
off after power is restored.
Table 2-8.
System Security Screen Options
(continued)
Option
Description
Summary of Contents for POWEREDGE T300
