manualshive.com logo in svg

Dell poweredge VRTX, Reference Manual

The Dell PowerEdge VRTX release note and user manual are available for free download from 88.208.23.73:8080. Gain valuable insights and learn how to optimize performance with this all-in-one compact server solution. Stay informed about the latest features, troubleshooting tips, and best practices, ensuring seamless operations for your business.

Share
Download
background image

Detailed 
Description

The controller detected a drive removal

Recommended 
Response Action

If unintended, verify drive installation. Remove and reseat the indicated disk. If the problem 
persists, contact technical support. Refer to the product documentation to choose a 
convenient contact method.

Category

System Health

SubCategory

PDR = Physical Disk

Severity

Severity 1 (Critical)

Trap/EventID

FALSE

LCD Message

Drive <number> is removed. Check drive

Initial Default.

FALSE

Filter 

Visibility

IPMI Alert SNMP 

Alert

Email 

Alert

LC Log

LCD

Power Off Power 

Cycle

Reset

FALSE

FALSE

FALSE

FALSE

FALSE

FALSE

FALSE

FALSE

FALSE

PDR1101

Message

Fault detected on drive

arg1

.

Arguments

•

arg1 = 

number

Detailed 
Description

The controller detected a failure on the disk and has taken the disk offline.

Recommended 
Response Action

Remove and reseat the failed disk. If the problem persists, contact technical support. Refer to 
the product documentation to choose a convenient contact method.

Category

System Health

SubCategory

PDR = Physical Disk

Severity

Severity 1 (Critical)

Trap/EventID

FALSE

LCD Message

Fault detected on drive <number>. Check drive.

Initial Default.

FALSE

Filter 

Visibility

IPMI Alert SNMP 

Alert

Email 

Alert

LC Log

LCD

Power Off Power 

Cycle

Reset

FALSE

FALSE

FALSE

FALSE

FALSE

FALSE

FALSE

FALSE

FALSE

PDR1102

Message

A predictive failure detected on drive

arg1

.

478

Summary of Contents for poweredge VRTX




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for poweredge VRTX

Brocade Communications Systems FastIron SX Hardware Installation Manual preview
FastIron SX
Brand: Brocade Communications Systems Pages: 182
National Instruments NI cRIO-9074XT User Manual And Specifications preview
NI cRIO-9074XT
Brand: National Instruments Pages: 25
Supermicro SC846A-R1200B User Manual preview
SC846A-R1200B
Brand: Supermicro Pages: 160
Intel Chassis SR1450 Product Brief preview
Chassis SR1450
Brand: Intel Pages: 6
Cisco TelePresence Server 7010 Installation Manual preview
TelePresence Server 7010
Brand: Cisco Pages: 204
Cisco TelePresence Server 7010 Hardware Installation And Maintenance Manual preview
TelePresence Server 7010
Brand: Cisco Pages: 287
Cisco CRS-1 - Carrier Routing System Router Administration Manual preview
CRS-1 - Carrier Routing System Router
Brand: Cisco Pages: 436
Artel InfinityLink IL6000 Installation And Operation Manual preview
InfinityLink IL6000
Brand: Artel Pages: 35

Brands by name

Popular brands

Load more brands