Dell PowerVault DLT, VS, and SDLT Media Handbook Version 2.0
11
•
Use the slide-in labels provided. Do not use adhesive labels or Post-it notes, and do not write
on the cartridge.
Figure 1-16.
Use Slide-in Label
•
Write in pen not pencil. Using a pencil can introduce contaminants to the tape path.
•
Use caution so loose labels in storage container don't stick to bottom of cartridge, covering
the hub.
•
Never touch the tape or tape leader. Dust and oils from your skin contaminate the tape and
affect performance. Store media vertically in protective plastic cases.
Figure 1-17.
Store Media Vertically in Protective Plastic Cases
•
If you drop a cartridge, perform a visual media inspection before inserting it into the drive.
NOTE:
The safety of your data relies on proper care and handling of media cartridges.
Visual Media Inspection
A visual media inspection is to be performed:
•
Each time a tape is loaded or changed.
•
When a tape cartridge is dropped or subject to a hard physical shock.
•
When a shipment of tapes shows any sign of shipping damage.
•
If the DLT, DLT VS or SDLT drive becomes inoperable after loading a tape.
NOTE:
If a drive error occurs, inspect the current and previous cartridge used in that drive.
Summary of Contents for PowerVault 110T DLT VS160
Page 4: ...2 ...
