.
System information
Table 19. System Configuration
Option
Description
Integrated NIC
Allows you to control the on-board LAN controller. The option ‘Enable UEFI Network Stack’ is not
selected by default. The options are:
•
Disabled
•
Enabled
•
Enabled w/PXE (default)
Integrated NIC2
Allows you to control the on-board LAN controller. The option ‘Enable UEFI Network Stack’ is not
selected by default. The options are:
•
Disabled
•
Enabled (default)
•
Enabled w/PXE
UEFI Network Stack
Allows pre-OS and early OS networking features to use any enabled NICs. this may be used without
PXE turned on.
•
Enable UEFI Network Stack
•
Default - (Disabled)
Serial Port
Determines how the built-in serial port operates.
Choose any one option:
•
Disabled
•
COM1 (selected by default)
•
COM2
•
COM3
•
COM4
SATA Operation
Allows you to configure the operating mode of the integrated hard drive controller.
•
Disabled = The SATA controllers are hidden
•
AHCI = SATA is configured for AHCI mode
•
RAID ON = SATA is configured to support RAID mode (selected by default)
Drives
Allows you to enable or disable the various drives on-board:
•
SATA-0 (enabled by default)
•
SATA-1 (enabled by default)
•
SATA-2 (enabled by default)
•
SATA-3 (enabled by default)
•
M.2 PCIe SSD-0 (enabled by default)
•
M.2 PCIe SSD-1 (enabled by default)
Smart Reporting
This field controls whether hard drive errors for integrated drives are reported during system startup.
The
Enable Smart Reporting option
is disabled by default.
USB Configuration
Allows you to enable or disable the integrated USB controller for:
•
Enable USB Boot Support
•
Enable Front USB Ports
System setup
21