Option
Description
PCIe Zone
Allows you to control the minimum and maximum fan speed in the PCIe Zone. The range of
characters is between 0 and 100.
NOTE:
When Thermal Mode is set in auto, Zero is the optimal speed level.
Post behavior
Table 27. POST Behavior
Option
Description
Numlock LED
Allows you to enable or disable the Numlock feature when your computer starts. This option is
enabled by default.
Keyboard Errors
Allows you to enable or disable the keyboard error reporting when the computer starts. The option
Enable Keyboard Error Detection
is enabled by default.
Extend BIOS POST Time
This option creates an additional pre-boot delay.
•
0 seconds (default)
•
5 seconds
•
10 seconds
Full Screen Logo
This option will display full screen logo if your image match screen resolution. The option
Enable Full
Screen Logo
is not set by default.
Warnings and Errors
This option causes the boot process to only pause when warning or errors are detected. Choose any
one of the option:
•
Prompt on Warnings and Errors—Default
•
Continue on Warnings
•
Continue on Warnings and Errors
Manageability
Table 28. Manageability
Option
Description
USB provision
This option is not selected by default.
MEBx Hotkey
This option is selected by default.
Virtualization support
Table 29. Virtualization Support
Option
Description
Virtualization
This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by the Intel Virtualization technology.
•
Enable Intel Virtualization Technology
28
System setup