Option
Description
This option is set by default.
VT for Direct I/O
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware
capabilities provided by the Intel Virtualization technology for direct I/O.
•
Enable VT for Direct I/O
This option is set by default.
Trusted Execution
This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional
hardware capabilities provided by Intel Trusted Execution Technology.
•
Trusted Execution
This option is not set by default.
Maintenance
Table 30. Maintenance
Option
Description
Service Tag
Displays the service tag of your computer.
Asset Tag
Allows you to create a system asset tag if an asset tag is not already set.
This option is not set by default.
SERR Messages
Controls the SERR message mechanism. This option is set by default. Some graphics cards require that
the SERR message mechanism be disabled.
BIOS Downgrade
Allows you to flash previous revisions of the system firmware.
•
Allow BIOS Downgrade
This option is set by default.
Data Wipe
Allows you to securely erase data from all internal storage devices.
•
Wipe on Next Boot
This option is not set by default.
BIOS Recovery
BIOS Recovery from Hard Drive
—This option is set by default. Allows you to recover the corrupted BIOS
from a recovery file on the HDD or an external USB key.
BIOS Auto-Recovery
— Allows you to recover the BIOS automatically.
NOTE:
BIOS Recovery from Hard Drive field should be enabled.
Always Perform Integrity Check
—Performs integrity check on every boot.
First Power On Date
Allows you the set Ownership date. The option
Set Ownership Date
is not set by default.
System setup
29