2. Install the:
a.
b.
c.
After working inside your computer
.
Solid State Drive
Removing the M.2 Solid State Drive—SSD module
1. Follow the procedures in
Before working inside your computer
2. Remove the:
a.
b.
c.
3. To remove the M.2 SSD module (Slot 4):
a. Remove the single (M2.0x3.0) screw that secures the thermal plate to the system [1].
b. Slide and remove the thermal plate [2].
c. Remove the single (M2.0x3.0) screw that secures the M.2 SSD to the system board [3].
d. Remove the M.2 SSD from the system [4].
NOTE:
Repeat the above steps for removal of other M.2 SSD installed (Slot 3 and 5).
Removing and installing components
37
