NOTE:
Ensure that you fold the keyboard data cable in perfect alignment.
3. Install the:
a.
b.
c.
After working inside your computer
.
Primary memory module
Removing the primary memory module
Before working inside your computer
.
2. Remove the:
a.
b.
c.
d.
3. To remove primary memory module:
a. Remove the single (M2.0x3.0) screw that secures the memory shield [1].
b. Slide and lift the memory shield from the memory module on the system [2].
c. Pry the retention clips away from the memory module until it pops up [3].
d. Lift the memory module and remove it from the system [4].
NOTE:
Repeat step (c) and (d) if there is another memory installed.
28
Removing and installing components
