Installing the primary memory module
1. To Install the primary memory module:
a. Insert the memory module into the memory socket [1].
b. Press the clips to secure the memory module to the system board [2].
c. Slide in the memory shield on the memory module [3].
d. Replace the single (M2.0x3.0) screw to secure the memory shield to the memory module [4].
2. Install the:
a.
b.
c.
d.
After working inside your computer
.
Secondary memory module
Removing the secondary memory module
Before working inside your computer
.
2. Remove the:
a.
b.
c.
3. To remove the secondary memory module:
a. Pry the retention clips away from the memory module until it pops up.
b. Lift the memory module and remove it from the system.
Removing and installing components
29
