Steps
1. For M.2 2280 SSD:
a. Place the M.2 SSD onto its slot on SSD carrier.
2. For M.2 2230 SSD:
a. Place the M.2 SSD into the SSD holder.
b. Replace the (M2x2) screw to secure the M.2 SSD to the holder.
c. Place the M.2 SSD with its holder on the SSD carrier.
3. Place the thermal plate above the M.2 SSD module.
4. Replace the (M2x3) screw to secure the SSD thermal plate to the M.2 SSD.
5. Replace the SSD module in its slot on the computer.
6. Replace the (M2x3) screw to secure the SSD module in place.
Next steps
1. Install the
.
2. Install the
3. Follow the procedure in
after working inside your computer
.
pokrywa dolna
Removing the base cover
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
.
About this task
The figure indicates the location of the base cover and provides a visual representation of the removal procedure
Demontowanie i montowanie
21
Summary of Contents for Precision 7750
